Concrete cutting in Napa CA - a clean opening right where your project needs it
Need a trench for new plumbing, a broken slab section out or a doorway in a wall? We cut it straight and clean up after.
- Licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
When do you need concrete cut, and what sets the price?
Concrete cutting in Napa, CA is how we saw through a slab, a wall or paving so you can open or remove concrete exactly where your project needs it, whether that's a trench for plumbing or electrical lines, a broken section of driveway, or a new door or window in a foundation wall. At First Choice Napa Concrete, I plan each cut before our crew makes it, because a cut in concrete can't be put back.
Most people call us in the middle of a bigger project, like a remodel, a new line out to a shed or a driveway with one bad panel, and they want to know what it'll cost and how long it holds things up. The price mostly turns on how many feet we cut, how thick the concrete is, whether there's steel in it, whether it's a floor or a wall, and whether you want the pieces broken out and hauled away. The schedule turns on the planning, since a cut near structural steel may need more checking before we start, and some jobs need the city's sign-off. My estimate says what's included and what isn't, so you have your own figure before anything happens.
How do you know your concrete needs to be cut?
One section cracked and sinking
When one part of a driveway or patio has broken up and dropped while the rest looks fine, the base under that part usually washed out or settled. Cutting out just that section with straight edges lets us replace it without tearing out the whole slab, and waiting usually lets the break spread into the panels next to it.
A new line under the slab
You're adding a bathroom, a gas line or power to a shed, and the slab sits right where the line has to run. A saw-cut trench keeps the opening narrow and the edges square for patching, while breaking it out with a hammer usually cracks concrete you meant to keep.
A wall where you want a door
A foundation or basement wall stands right where you'd like a doorway or a window. That opening needs a different saw and real planning about what holds up the wall above it, and rushing past the planning is how a simple opening turns into a structural repair.
How our concrete cutting jobs run, start to finish
Before we cut, I ask for any drawings you have of the slab or wall, because they show where the steel is likely to be. I look at the surface and the space around it, then we mark the lines exactly where the opening has to go, so there's no guessing once the saw is running. Our crew makes the cuts, breaks out and hauls the pieces when that's part of the job, and leaves the site clean. Your quote says plainly whether breaking out and hauling are included, because that's the line people get surprised by most often.
A lot of cutting leads to a pour. If the piece we cut out is part of a driveway, the replacement is the same work as concrete driveway building, and a cut-out patio section gets the same steps as concrete patio construction. Either way, I'd rather you spend on digging out and packing the subgrade, the dirt and gravel the slab sits on, than on a fancier finish, because the base is hidden on day one and it's the first thing that fails when someone skimps on it.
Trenches and patches in a slab
This suits you if a new pipe or wire has to run under a floor, driveway or patio, or if one broken section has to come out. Straight saw cuts keep the opening tight and the edges square, so the patch fits against concrete that stays put.
Doors and windows in a wall
This suits a foundation or basement wall where you want a doorway, a window or a pass-through for a pipe. It takes more planning and setup than floor work, so it's the job where your drawings help most.
Get a free on-site estimate for your concrete cut
Send the form and we'll reply within one business day to set a time. I come out, look at the slab or wall, and give you a free estimate that says what's included, with no obligation.
Call (707) 254-6028What happens after you call us about a cut in Napa?
Here's how a cutting job runs from your side, from the first call to the final walk-through, so you know who's doing what at each step.
Call or send a request
Call (707) 254-6028 or send the form, and we'll set a time for me to come out. Tell us what you're cutting and what project it's for.
I come out and estimate
I look at the site, ask what you need and go through the estimate with you. It says what's included and what isn't, so you know what you're paying for before anything gets cut.
We cut, clean up, walk through
Once you say yes, we line up any permits and inspections, and our crew does the cutting with me on the job. When it's done, I walk the finished work with you so you know what's left and how to care for any new concrete.
Why people in Napa call us to cut concrete
A cut can't be undone, so I plan it before we make it. Tell us about your project, call (707) 254-6028 or email quotes@concretenapa.com, and I'll come take a look.
Licensed and insured for the work
We're licensed and insured. California has a license class just for concrete sawing, breaking and coring, so it's fair to ask anyone who's going to cut your concrete how they're licensed.
I do the estimate myself
I come out to look at the job and write the estimate, and I'm on site with our crew when the cutting happens. The person who planned the cut is the one watching the blade go in, so nothing gets lost between the quote and the work.
Pouring and cutting since 2013
I started this business in Napa in 2013, after learning the trade on a crew that poured driveways, patios and foundations. Knowing how a slab was built tells me a lot about how it will cut and what it'll take to patch it.
We talk with the city early
The city of Napa encourages you to get in touch before you apply for a building permit, and its list of exempt work names sidewalks and driveways, not concrete cutting. So we talk with the city office early about your job, tell you who books each step and plan the work around any sign-off.
Concrete cutting, cleanup and recycling in Napa
In Napa, anyone doing construction or ground-disturbing work has to keep pollution out of the storm drains, and the city keeps a checklist that sets which practices a job needs. Saw cutting throws off slurry, a gray mix of water and concrete dust, and the county's stormwater program says to keep it out of drains and creeks by vacuuming it up for proper disposal or sending it onto dirt. That's why we pick up our slurry as we cut, so it stays out of your gutter and off the street.
Broken concrete doesn't have to go to the landfill. The county points people to crushing companies such as Napa Recycling and Waste Services or Upper Valley Disposal & Recycling, and small amounts of dry concrete waste can go in the trash. We recycle what we break out wherever we can, and a lot of our cutting calls come from remodels adding a line under an older slab, which we handle the same way on jobs in American Canyon and Sonoma.
Questions about concrete cutting in Napa
How much does concrete cutting cost per foot in Napa?
Across the US, saw cutting concrete slabs and walls usually costs about $4 to $25 per linear foot, and that's the market's range for the sawing, not a price from us. Reinforced or deeper concrete costs more per foot than thin, easy-to-reach slabs, and on a small job a minimum or trip charge can matter more than the per-foot rate. The estimate I write on site gives you the figure for your job.
Does the price of concrete cutting include hauling the concrete away?
Not always, because sawing and removal are separate jobs, and some cutters cut the lines and leave the panels where they are. Breaking, hauling and recycling or disposal fees can add up to more than the sawing itself, so check that line on every quote you compare.
What is the best way to cut a concrete wall versus a floor?
Floors, driveways and other flat surfaces usually get slab sawing, and standing surfaces like foundation walls get wall sawing, so the surface you need opened decides the saw and the setup. A wall saw can typically cut concrete as thick as 24 inches, which puts most house walls within reach.
Do you need to scan concrete before cutting it?
You may, when a cut could cross post-tension cables, the steel cables some slabs are tightened with, or other structural steel. In that case the job can need drawings, a GPR scan, which uses radar to show what's inside the concrete, and an engineer's input before anyone cuts. Sharing your drawings early lets that step come first instead of holding up the job.
How do I cut a doorway into a foundation wall?
Plan the support for the wall above before you cut the opening. One cutting guide cuts the pocket for the lintel, the beam that carries the wall over the door, installs the lintel, and only then cuts the opening below it, because doing it the other way around leaves the wall above sitting on unsupported stubs at the corners. That's a job to start with drawings, not a saw.
Is the dust from concrete cutting a health risk?
It can be, because concrete dust contains crystalline silica, and California has a state standard covering worker exposure to it on construction, repair and removal work. Ask any crew how it controls dust. We cut wet, so the water holds the dust down, and that's also why there's slurry to clean up afterward.
Related concrete work that often follows a cut
- Concrete driveway building
Choose this when the cracks run through most of the driveway, since a new slab poured on a fresh base usually outlasts patching one panel at a time.
- Concrete patio construction
After an old patio is cut out, this is the work that pours a new slab sloped so water runs away from your house.
Service areas for concrete cutting around Napa
First Choice Napa Concrete is based in Napa, CA, and we cut concrete in many of the cities around it, including Vallejo and Fairfield. The 12 cities below have their own pages, but they're some of the places we work, not all of them.
Napa, CA
Get your concrete cut planned and priced
The sooner I see the slab or wall, the sooner the cut can be planned around the rest of your project instead of holding it up.